The problem
This Bellevue homeowner has an older Payne Plus 80 gas furnace in the attic. It needed a new hot surface ignitor, the part that lights the burners.
When the thermostat calls for heat, the ignitor glows red hot and the gas lights off it. Ignitors are wear parts. They are brittle, they heat up and cool down on every cycle, and after enough years one cracks or burns out. When that happens the furnace cannot light, so it may start up and then shut back down without making any heat.
What we did
- Took the furnace doors off to get to the burner compartment.
- Replaced the hot surface ignitor with a new silicon nitride ignitor. Silicon nitride ignitors are tougher than the older silicon carbide style and generally last longer.
- Put the doors back on and returned the furnace to service.
The result
The furnace has a new ignitor and is back in service for the heating season. An ignitor is a small part, but a gas furnace makes no heat without one. If your furnace is due for a look before the cold sets in, our pre-winter furnace checklist covers what you can check yourself.
From our job records. No customer names, addresses or contact info shown, by design.
Furnace not lighting?
We repair gas furnaces across Bellevue and the Eastside. A technician finds the cause first and confirms your price in writing before any work begins.
Furnace repair in Bellevue · Pre-winter furnace checklist · Bellevue furnace flue pipe replacement · More OutToday work in Bellevue · All recent work


